How To

How To Reset The Wyze Camera? Easy And Quick Steps

Resetting the Wyze Camera can be the easiest way to troubleshoot minor issues that you may encounter over time. To be honest, resetting your camera will return it to its initial state and factory default settings. Your camera can revert to its normal functionality as the reset removes any unneeded data, erases existing configuration files, and restores customizations.

Any technical faults that prevent it from working properly can be fixed with a good reset. Finally, a new camera version with all the capabilities and functionalities get discovered. However, the question is: how to reset the Wyze camera? Whether you want to fix problems, sell your Wyze Cam, or just start again, you need to know the effective ways to do so.

However, there is no need to break your sweat to reset your Wyze camera. It’s straightforward. We’re going to explain the steps you need to follow to perform the reset process effectively. Keep reading until the end.

How to Reset the Wyze Camera Easily and Quickly?

How To Reset The Wyze Camera easy and quickly

A Reset on the Wyze Camera can fix connectivity errors, performance issues, and other underlying technical difficulties. It restores the device to its previous working state and makes it fresh, responsive, and ready to use. If you want to reset your camera, you have to turn the camera off first. This will stop the ongoing data transmission and firmware update.

Before heading over to reset your camera, never forget to remove the pre-installed microSD card. An accidental crash can cause potential data loss if you don’t slide the memory card out of the slot. However, we’re going to guide you through the reset process for all models of Wyze cameras, specifically Wyze Cam V1 and V2, and Wyze Cam Pan and V3. So once you’re ready to perform the reset process, you can stick to the following guidelines:

Recommended Post: How To Take Screenshots on an MSI Laptop?

Steps to reset Wyze Cam V1 and V2:

  • First, press and hold the setup button on the bottom of the camera. Keep pressing and holding until it starts resetting the camera.
  • Wait for at least thirty seconds to let the LED status light on and turn yellow to indicate it’s initializing the camera.
  • Once the light initializes the device, wait for more to get the light flashing red to indicate the completion of the reset.

Steps to reset Wyze Cam Pan and V3:

  • Press and hold the setup button on the bottom of the camera when it’s connected to a power source.
  • Keep holding and waiting for a few seconds to let the device initialize the resetting process.
  • Once the reset is in progress, the LED status light will flash solid yellow to inform the device that it is restoring to its default settings.
  • Once the reset is completed, the LED status light will indicate the flashing red sign.

How to Set up the Wyze Camera after a Reset?

How To set The Wyze Camera after reset

Once you reset your Wyze camera, it removes all previous settings and configurations. That means you need to set it up again to regain its capability, features, and functionality. The overall process is simple. Here are the steps you need to follow to get your camera up and running:

  • To configure the setting smoothly and perfectly, you can download and install the Wyze app from the Play Store on your smartphone first.
  • Launch the app on your phone by signing in to your Wyze account to pair the camera with the app.
  • Connect your camera to a power outlet, either using a USB cable or a power adapter.
  • Press and hold the setup button until you hear the “Ready to Connect” voice prompt.
  • Now connect the camera to the app by tapping on the plus icon in the left corner of the app and selecting the “Add Device” option.
  • Enter the provided QR code and your Wi-Fi network credentials to let the LED status light change from flashing red to blue to ensure the connection.
  • Finally, give your camera an easily recognizable name and tap on the “Finish” button to complete the settings.

Must Read : How To Screenshot Your Laptop On Windows 10?

FAQs about How to reset the Wyze Camera?

Experiencing issues with a Wyze camera is common. To solve the issue, gathering the necessary information is vital. Hence, we’re going to answer some frequently asked questions with appropriate information.

Factory reset vs. hard reset: which one is better?

A factory reset is a software-based process. On the other hand, a hard reset involves removing the power source, battery, and other physical parts. From all points of view, a factory reset is always better.

What does the solid yellow LED light imply during the reset procedure?

If you observe that the LED light flashes solid yellow, it means the camera has power issues. In this case, you need to replace the power cable or seek assistance from the support center.

Why is the Wyze camera setup button not working?

A Wyze camera may have a setup button hat is unable to function. You can factory reset the camera to fix the issue. But you have to replace the button if it’s damaged.

Can I restore the default settings of a Wyze camera without a reset?

Yes, you can easily restore the settings by creating a new settings file manually. The process is the same as the reset and takes up to five minutes to be completed.

Final Words:

If you’re experiencing manifold issues with your Wyze Camera, you can decide to reset it as soon as possible. You can troubleshoot all the underlying problems and make the camera function like before with an effective reset. How to reset the Wyze camera? To be fair, the overall procedure is easy and simple; you don’t need any technical assistance from anyone else.

In the meantime, you have acquired the knowledge and skills you need to apply to reset your Camera. You can follow the given steps to restore the default settings and revert the camera to its original state. Nonetheless, if you face any drawbacks during the resetting period, you can feel free to ask us. We’re always here to provide you with quick solutions.

Ralph Litteral

Technology seems like an intricate field to those who have no academic knowledge and no practical expertise. Non-technical individuals should master the underlying topics of technology to make a strong connection with it. They need to gather essential insight and intuition to propel themselves to the next level. To help them out, Ralph Litteral, an experienced tech-savvy writer- is devoted to covering the complex arenas of technology through his write-ups. He usually provides how-to guides on technology to help others achieve their technological goals. His immense knowledge of technology makes him one of the well-seasoned writers on how-to guidelines.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button
close button
<